Search results for "Tyre rubber"
showing 9 items of 9 documents
Toward more realistic viscosity measurements of tyre rubber–bitumen blends
2014
AbstractThe measurement of rheological properties of the tyre rubber bitumen blends is often challenging due to presence of suspended tyre rubber’s crumbs. Furthermore, the phase separation during the course of measurements makes the viscosity of these non-homogeneous blends difficult to ascertain. In this study, a new dual helical impeller was designed and manufactured to be used with a rotational viscometer in order to have a real-time control of the viscosity while performing a laboratory mixing of the blends. Layer based manufacturing techniques showed to be a convenient method to produce complex shaped impeller prototypes before manufacturing the more expensive stainless steel assembly…
Are we correctly measuring the rotational viscosity of heterogeneous bituminous binders?
2020
Modified bituminous binders allow asphalt technologists to design asphalt mixtures with superior performance. However, several recent studies highlighted that due to the complexity of these material, their characterisation can be challenging since common procedures used to characterise neat bitumen might not be adequate. For instance, during high temperature rotational viscosity testing of recycled tyre rubber modified binders (RTR-MB), a number of changes may occur to the sample leading to the here-defined sample stability which in turn provides misleading results. In this study the authors want to first provide a deeper understanding of this phenomenon by a numerical analysis using a besp…
On the Assessment and Optimisation of the Processing Conditions of Tyre-Rubber Modified Bitumen
2021
The current study aims at understanding the effect of the variables associated with manufacturing rubberised bitumens in order to develop rubberised bitumen with superior mechanical properties and identify optimised processing conditions for its production. The experimental work covered extensive laboratory testing of several rubberised bitumen blends. The rubberised bitumen was manufactured using four paving grade bitumens (180/240, 160/220, 70/100, 80/100), three tyre rubber types (mechanical ground, waterjet powder, ambient ground powder), and various processing conditions (shear levels, temperatures, processing times). Characterisation of the manufactured blends included rotational visc…
An investigation on using pre-treated tyre rubber as a replacement of synthetic polymers for bitumen modification
2015
Rubberized bitumen obtained through a swelling process, has widely proven to be a successful technology for asphalt pavement applications and a solution to reduce the dismantling of tyre rubber on landfills. However, this technology presents two main operative issues which needs the adoption of costly special equipment. Firstly, significant high value of High Temperature Viscosity (HTV) which imposes mixing and compaction difficulties and leads to increased energy consumption and emissions. Furthermore, during the hot storage period, phase separation between rubber particles and the base bitumen could occur. Developing Recycled Tyre Rubber Modified Bitumen (RTR-MBs) with improved storage st…
Tyre rubber-modified bitumens development: the effect of varying processing conditions
2013
Tyre rubber-modified binders (TR-MBs), produced through McDonald’s wet process and used worldwide (e.g. asphalt rubber), have been demonstrated to provide various benefits to pavements and, moreover, they represent a good opportunity for recycling tyre rubber (TR). However, this technology is still struggling to be fully adopted in Europe, mainly because of their poor stability during high temperatures storage, which leads to high initial costs in modifying existing asphalt plants. Storage stable TR-MBs are proving to be a great option and their development could be the key to spread the recycling of TR within paving applications in Europe. This paper aims to enrich this field of research b…
Recycled Tyre Rubber Modified Bitumens for road asphalt mixtures: A literature review
2013
AbstractNowadays, only a small percentage of waste tyres are being land-filled. The Recycled Tyre Rubber is being used in new tyres, in tyre-derived fuel, in civil engineering applications and products, in moulded rubber products, in agricultural uses, recreational and sports applications and in rubber modified asphalt applications. The benefits of using rubber modified asphalts are being more widely experienced and recognized, and the incorporation of tyres into asphalt is likely to increase. The technology with much different evidence of success demonstrated by roads built in the last 40years is the rubberised asphalt mixture obtained through the so-called “wet process” which involves the…
Formulation, Characterization and Optimization of the Processing Conditions of Blends of Recycled Polyethylene and Ground Tyre Rubbers: Mechanical an…
2005
Abstract Recycling represents a valid alternative to the disposal of post-consumer plastics in common landfills if it is possible to obtain new materials with good final properties compatible with practical application and, above all, by using cheap methods. In this work the possibility to produce secondary materials by blending recycled polyethylene (RPE) coming from greenhouses and post-consumer ground tyre rubber (GTR) has been studied. In particular, the preparation of these blends has been carried out in a common industrial twin screw extruder. RPE pellets and GTR powder were fed to the extruder without any other additive. Temperature, processing speed, mixing procedure and composition…
Towards storage-stable high-content recycled tyre rubber modified bitumen
2018
The addition of crumb rubber particles as bitumen modifier can be currently considered as a well-established alternative to conventional polymers for bitumen modification. However, Recycle Tyre Rubber (RTR) modified binders still present drawbacks such as poor mix workability and hot storage stability. Within this study the authors try unlocking the full potential of devulcanised tyre rubber-heavy oils blend, named Liquid Rubber (LR), by exploring the possibility of tailoring recycled polymer modified bitumen with unconventional high-content of RTR and designed to overcome the above mentioned technological problems of RTR modified bitumen while keeping its advantages. Results show that LR-b…
Optimisation of liquid rubber modified bitumen for road pavements and roofing applications
2020
Abstract Polymer Modified Bitumens (PMBs) are largely used for pavement and roofing membranes applications with Styrene-Butadiene-Styrene Block copolymer (SBS) playing a major role in both markets despite its constantly increasing price due to the rising demand for quality bitumen modifiers. On the other hand, there is an increasing trend of recycling end of life tyres generating Recycled Tyre Rubber (RTR) at affordable price. This investigation aims at engineering a modified bitumen with a combination of Liquid Rubber (LR), a homogeneous blend of 50–70% RTR pre-processed in combination with heavy oils, and a wax denominated Ethylene Bis Stearamide (EBS). In the first phase, the effect of L…